Nabend meine Lieben Linuxjunkies.

Ich habe mein erstes Problem. Und zwar habe ich mein System noch einmal neu aufgesetzt, da ich denke ich in den letzten 4-6 Linuxanfängerwochen doch 1-2 Sachen falsch gemacht habe und ich nun noch einmal SAUBER starten will. Es läuft auch wieder fast alles, außer HPLIP.

sudo apt-get install hplip
sudo apt-get install hplip-gui
         

gksu hp-setup
         

Ich registriere den Drucker über USB, funktioniert auch alles.

Aber sobald ich die HP-Toolbox starten will passiert nix. Eigentlich müsste sich die GUI öffnen. Selbst das HP-Symbol in der Statusleiste erscheint nicht wie es eigentlich der Fall sein sollte. Helft mir bitte.

hp-check gibt folgende Ausgabe:

denis-florian@Denis-Buero-Linux:~$ hp-check
Saving output in log file: /home/denis-florian/hp-check.log

HP Linux Imaging and Printing System (ver. 3.14.3)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).   

Check types:                                                                    
a. EXTERNALDEP - External Dependencies                                          
b. GENERALDEP - General Dependencies (required both at compile and run time)    
c. COMPILEDEP - Compile time Dependencies                                       
d. [All are run-time checks]                                                    
PYEXT SCANCONF QUEUES PERMISSION                                                

Status Types:
    OK
    MISSING       - Missing Dependency or Permission or Plug-in
    INCOMPAT      - Incompatible dependency-version or Plugin-version

warning: ubuntu-14.04 version is not supported. Using ubuntu-13.10 versions dependencies to verify and install...

---------------
| SYSTEM INFO |
---------------

 Kernel: 3.16.0-33-generic #44~14.04.1-Ubuntu SMP Fri Mar 13 10:33:29 UTC 2015 GNU/Linux
 Host: Denis-Buero-Linux
 Proc: 3.16.0-33-generic #44~14.04.1-Ubuntu SMP Fri Mar 13 10:33:29 UTC 2015 GNU/Linux
 Distribution: ubuntu 14.04
 Bitness: 64 bit


-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.14.3
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro  14.04 version 

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.14.3

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
html=/usr/share/doc/hplip-3.14.3
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.14.3
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: Datei oder Verzeichnis nicht gefunden

Current contents of '~/.hplip/hplip.conf' file:
warning: Could not access file: Keine Berechtigung
 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

--------------------------
|  External Dependencies |
--------------------------

 policykit            Admin-Policy-framework    OPTIONAL        -               0.105           OK         -
 gs                   Ghostscript               REQUIRED        7.05            9.10            OK         -
 network              Network-wget              OPTIONAL        -               1.15            OK         -
 scanimage            Shell-Scanning            OPTIONAL        1.0             1.0.23          OK         -
 avahi-utils          avahi-utils               OPTIONAL        -               0.6.31          OK         -
 error: dbus          DBus                      REQUIRED        -               1.6.18          MISSING    'DBUS may not be installed or not running'
 error: cups          CUPS                      REQUIRED        1.1             -               INCOMPAT   'CUPS may not be installed or not running'
 xsane                SANE-GUI                  OPTIONAL        0.9             0.998           OK         -

-------------------------
|  General Dependencies |
-------------------------

 reportlab            Python-PDF-Lib            OPTIONAL        2.0             3.0             OK         -
 error: libcrypto     OpenSSL-Crypto-Lib        REQUIRED        -               1.0.1           MISSING    'libcrypto needs to be installed'
 pil                  Python-Image-Lib          OPTIONAL        -               1.1.7           OK         -
 pyqt4-dbus           PyQt4-DBUS                REQUIRED        4.0             4.10.4          OK         -
 error: libjpeg       JPEG-Lib                  REQUIRED        -               -               MISSING    'libjpeg needs to be installed'
 libpthread           POSIX-Threads-Lib         REQUIRED        -               2.19            OK         -
 python-dbus          Python-DBUS               REQUIRED        0.80.0          1.2.0           OK         -
 error: python-devel  Python-SDK                REQUIRED        2.2             2.7.6           MISSING    'python-devel needs to be installed'
 pyqt4                Python-Qt4                REQUIRED        4.0             4.10.4          OK         -
 error: cups-devel    CUPS-SDK                  REQUIRED        -               -               MISSING    'cups-devel needs to be installed'
 error: sane-devel    SANE-SDK                  REQUIRED        -               -               MISSING    'sane-devel needs to be installed'
 error: libusb        USB-Lib                   REQUIRED        -               1.0             MISSING    'libusb needs to be installed'
 sane                 Scan-Lib                  REQUIRED        -               -               OK         -
 error: cups-image    CUPS-Image-Lib            REQUIRED        -               -               MISSING    'cups-image needs to be installed'
 error: libnetsnmp-devel SNMP-Networking-SDK       REQUIRED        5.0.9           -               MISSING    'libnetsnmp-devel needs to be installed'
 python-xml           Python-XML-Lib            REQUIRED        -               2.1.0           OK         -
 python-notify        Desktop-notifications     OPTIONAL        -               -               OK         -

------------------------------
|  Compile Time Dependencies |
------------------------------

 error: gcc           gcc-Compiler              REQUIRED        -               4.8.2           MISSING    'gcc needs to be installed'
 error: libtool       Build-tools               REQUIRED        -               -               MISSING    'libtool needs to be installed'
 make                 GNU-Build-tools           REQUIRED        3.0             3.81            OK         -

----------------------
|  Python Extentions |
----------------------

 cupsext              CUPS-Extension            REQUIRED        -               3.14.3          OK         -
 pcardext             PhotoCard-Extension       REQUIRED        -               3.14.3          OK         -
 hpmudext             IO-Extension              REQUIRED        -               3.14.3          OK         -

-----------------------
|  Scan Configuration |
-----------------------

 hpaio                HPLIP-SANE-Backend        REQUIRED        -               3.14.3          OK         'hpaio found in /etc/sane.d/dll.conf'
 scanext              Scan-SANE-Extension       REQUIRED        -               3.14.3          OK         -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

device `hpaio:/usb/Deskjet_3520_series?serial=CN4822G0QV05SY' is a Hewlett-Packard Deskjet_3520_series all-in-one


--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                        Model                 
  --------------------------------  ----------------------
  hp:/usb/Deskjet_3520_series?seri  HP Deskjet 3520 series
  al=CN4822G0QV05SY                                       

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
Deskjet_3520
------------
Type: Printer
Device URI: hp:/usb/Deskjet_3520_series?serial=CN4822G0QV05SY
PPD: /etc/cups/ppd/Deskjet_3520.ppd
PPD Description: HP Deskjet 3520 Series, hpcups 3.14.3
Printer status: printer Deskjet_3520 is idle.  enabled since Di 24 Mär 2015 16:32:27 CET
Communication status: Good

HP_Deskjet_3520
---------------
Type: Printer
Device URI: hp:/usb/Deskjet_3520_series?serial=CN4822G0QV05SY
PPD: /etc/cups/ppd/HP_Deskjet_3520.ppd
PPD Description: HP Deskjet 3520 Series, hpcups 3.14.3
Printer status: printer HP_Deskjet_3520 disabled since Di 24 Mär 2015 12:24:34 CET -    Backend /usr/lib/cups/backend/hp does not exist!
Communication status: Good


--------------
| PERMISSION |
--------------

USB             Deskjet_3520                   Required        -        -        OK       Node:'/dev/bus/usb/002/004' Perm:'  root  lp rw- rw- rw- rw- r--'
 
-----------
| SUMMARY |
-----------

Missing Required Dependencies
-----------------------------
error: 'libdbus-1-dev' package is missing/incompatible 
error: 'libcups2' package is missing/incompatible 
error: 'openssl' package is missing/incompatible 
error: 'libjpeg-dev' package is missing/incompatible 
error: 'python-dev' package is missing/incompatible 
error: 'libcups2-dev' package is missing/incompatible 
error: 'cups-bsd' package is missing/incompatible 
error: 'cups-client' package is missing/incompatible 
error: 'libsane-dev' package is missing/incompatible 
error: 'libusb-1.0.0-dev' package is missing/incompatible 
error: 'libcupsimage2-dev' package is missing/incompatible 
error: 'libsnmp-dev' package is missing/incompatible 
error: 'snmp-mibs-downloader' package is missing/incompatible 
error: 'build-essential' package is missing/incompatible 
error: 'libtool' package is missing/incompatible 

Missing Optional Dependencies
-----------------------------
None


Total Errors: 12
Total Warnings: 1

Run 'hp-doctor' command to prompt and fix the issues. 

Done.
         

Liebe Grüße

Lieber LinuxXFreak

hast du schon HPLIP ? Wiki ? ubuntuusers.de gelesen?

Ja habe ich schon. Hilft mir ehrlich gesagt nicht weiter^^

Starte das Ding doch mal aus dem Terminal. Wenn Fehler auftauchen landen die im stdout und das siehst du dann im Terminal, gibt oft genug Hinweise darüber warum dann was nicht starten kann

muhaaaaa^^
Ich habs, ich brauche dich einfach um mein Hirn anzuregen Cosinus

Ich habe das HP-Setup mal im Terminal gestartet und habe dann Die Fehlermeldung bekommen

Current contents of '~/.hplip/hplip.conf' file:
warning: Could not access file: Keine Berechtigung
         

Habe nun einfach mal per nautlius im sudo Modus die Zugriffsrechte des .hplip Ordners auf meinen User geändert (Waren vorher alle auf root) und alles funktioniert. Wie kommt sowas? Bei meiner ersten installation lief es auch ohne die Berechtigungsänderung.

denis-florian@Denis-Buero-Linux:~$ hp-check
Saving output in log file: /home/denis-florian/hp-check.log

HP Linux Imaging and Printing System (ver. 3.14.3)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).   

Check types:                                                                    
a. EXTERNALDEP - External Dependencies                                          
b. GENERALDEP - General Dependencies (required both at compile and run time)    
c. COMPILEDEP - Compile time Dependencies                                       
d. [All are run-time checks]                                                    
PYEXT SCANCONF QUEUES PERMISSION                                                

Status Types:
    OK
    MISSING       - Missing Dependency or Permission or Plug-in
    INCOMPAT      - Incompatible dependency-version or Plugin-version

warning: ubuntu-14.04 version is not supported. Using ubuntu-13.10 versions dependencies to verify and install...

---------------
| SYSTEM INFO |
---------------

 Kernel: 3.16.0-33-generic #44~14.04.1-Ubuntu SMP Fri Mar 13 10:33:29 UTC 2015 GNU/Linux
 Host: Denis-Buero-Linux
 Proc: 3.16.0-33-generic #44~14.04.1-Ubuntu SMP Fri Mar 13 10:33:29 UTC 2015 GNU/Linux
 Distribution: ubuntu 14.04
 Bitness: 64 bit


-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.14.3
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro  14.04 version 

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.14.3

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
html=/usr/share/doc/hplip-3.14.3
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.14.3
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: Datei oder Verzeichnis nicht gefunden

Current contents of '~/.hplip/hplip.conf' file:
[settings]
systray_visible = 0
systray_messages = 0

[last_used]
device_uri = "hp:/usb/Deskjet_3520_series?serial=CN4822G0QV05SY"
printer_name = 
working_dir = .

[commands]
scan = /usr/bin/simple-scan %SANE_URI%

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
interval = 5
device_list = 

[fax]
voice_phone = 
email_address = 

[upgrade]
notify_upgrade = false
last_upgraded_time = 1427213175.34272
pending_upgrade_time = 0

[installation]
date_time = 24.03.2015 17:12:40
version = 3.14.3


 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>

--------------------------
|  External Dependencies |
--------------------------

 policykit            Admin-Policy-framework    OPTIONAL        -               0.105           OK         -
 gs                   Ghostscript               REQUIRED        7.05            9.10            OK         -
 network              Network-wget              OPTIONAL        -               1.15            OK         -
 scanimage            Shell-Scanning            OPTIONAL        1.0             1.0.23          OK         -
 avahi-utils          avahi-utils               OPTIONAL        -               0.6.31          OK         -
 dbus                 DBus                      REQUIRED        -               1.6.18          OK         -
 cups                 CUPS                      REQUIRED        1.1             1.7.2           OK         'CUPS Scheduler is running'
 xsane                SANE-GUI                  OPTIONAL        0.9             0.998           OK         -

-------------------------
|  General Dependencies |
-------------------------

 reportlab            Python-PDF-Lib            OPTIONAL        2.0             3.0             OK         -
 libcrypto            OpenSSL-Crypto-Lib        REQUIRED        -               1.0.1           OK         -
 pil                  Python-Image-Lib          OPTIONAL        -               1.1.7           OK         -
 pyqt4-dbus           PyQt4-DBUS                REQUIRED        4.0             4.10.4          OK         -
 libjpeg              JPEG-Lib                  REQUIRED        -               -               OK         -
 libpthread           POSIX-Threads-Lib         REQUIRED        -               2.19            OK         -
 python-dbus          Python-DBUS               REQUIRED        0.80.0          1.2.0           OK         -
 python-devel         Python-SDK                REQUIRED        2.2             2.7.6           OK         -
 pyqt4                Python-Qt4                REQUIRED        4.0             4.10.4          OK         -
 cups-devel           CUPS-SDK                  REQUIRED        -               1.7.2           OK         -
 sane-devel           SANE-SDK                  REQUIRED        -               1.0.23          OK         -
 libusb               USB-Lib                   REQUIRED        -               1.0             OK         -
 sane                 Scan-Lib                  REQUIRED        -               1.0.23          OK         -
 cups-image           CUPS-Image-Lib            REQUIRED        -               1.7.2           OK         -
 libnetsnmp-devel     SNMP-Networking-SDK       REQUIRED        5.0.9           5.7.2           OK         -
 python-xml           Python-XML-Lib            REQUIRED        -               2.1.0           OK         -
 python-notify        Desktop-notifications     OPTIONAL        -               -               OK         -

------------------------------
|  Compile Time Dependencies |
------------------------------

 gcc                  gcc-Compiler              REQUIRED        -               4.8.2           OK         -
 libtool              Build-tools               REQUIRED        -               2.4.2           OK         -
 make                 GNU-Build-tools           REQUIRED        3.0             3.81            OK         -

----------------------
|  Python Extentions |
----------------------

 cupsext              CUPS-Extension            REQUIRED        -               3.14.3          OK         -
 pcardext             PhotoCard-Extension       REQUIRED        -               3.14.3          OK         -
 hpmudext             IO-Extension              REQUIRED        -               3.14.3          OK         -

-----------------------
|  Scan Configuration |
-----------------------

 hpaio                HPLIP-SANE-Backend        REQUIRED        -               3.14.3          OK         'hpaio found in /etc/sane.d/dll.conf'
 scanext              Scan-SANE-Extension       REQUIRED        -               3.14.3          OK         -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

device `hpaio:/usb/Deskjet_3520_series?serial=CN4822G0QV05SY' is a Hewlett-Packard Deskjet_3520_series all-in-one


--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                        Model                 
  --------------------------------  ----------------------
  hp:/usb/Deskjet_3520_series?seri  HP Deskjet 3520 series
  al=CN4822G0QV05SY                                       

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
HP_Deskjet_3520
---------------
Type: Printer
Device URI: hp:/usb/Deskjet_3520_series?serial=CN4822G0QV05SY
PPD: /etc/cups/ppd/HP_Deskjet_3520.ppd
PPD Description: HP Deskjet 3520 Series, hpcups 3.14.3
Printer status: printer HP_Deskjet_3520 is idle.  enabled since Di 24 Mär 2015 17:01:13 CET
Communication status: Good


--------------
| PERMISSION |
--------------

USB             HP_Deskjet_3520                Required        -        -        OK       Node:'/dev/bus/usb/002/002' Perm:'  root  lp rw- rw- rw- rw- r--'
No errors or warnings.

Done.
denis-florian@Denis-Buero-Linux:~$
         

.hplip Ordners auf meinen User geändert (Waren vorher alle auf root)

Der superuser hat offensichtlich die Ordner/Dateien in dein ~ erstellt
Was genau macht denn das hp-setup...das hast du ja mit sudo ausgeführt

hp-setup öffnet ne GUI zum konfigurieren und initialisieren von meinem Netzwerkdrucker.

Bei Ubuntuusers steht aber auch das der Befehl "sudo hp-setup" heißen muss. Also mit root.

Klingt nach bugreport schreiben

Mir hat das ganze keine Ruhe gelassen. Ich habe nun heute morgen (Ich habe ja im Urlaub nix besseres zu tun ) Alles noch mal von vorne installiert. Die Distri und habe direkt mit HPLIP angefangen. Man beachte, entgegen der Aussage in der Ubuntu Wiki hp-setup ohne sudo.

sudo apt-get install hplip && sudo apt-get install hplip-gui && hp-setup
         

Zitat von Ubuntu-Wiki

Konfiguration
Zum Einrichten des Gerätes verwendet man am besten den mitgelieferten grafischen Assistenten (das Paket hplip-gui muss hierfür installiert sein - siehe oben). Das Konfigurationsprogramm benötigt darüber hinaus Administratorrechte:

gksudo hp-setup
         

Und alles funkt....die Fehler liegen an dem sudo beim hp-setup. Werde ich mich mal um eine Korrektur der Wiki bemühen.

Edith: Habe den Beitrag jetzt mal geändert. Mal schauen ob Beschwerden kommen

hxxp://wiki.ubuntuusers.de/HPLIP

Dein Befehl lässt sich auch vereinfachen...statt

sudo apt-get install hplip && sudo apt-get install hplip-gui && hp-setup
         

kannst du schreiben

sudo apt-get install hplip hplip-gui && hp-setup
         

Du kannst also mehrere Pakete mit einem apt-get install Aufruf installieren